The tip decides the shape of the water. The orifice size decides whether that tip matches your pump. A wand is a pressure-rated part, not a longer handle.
Updated November 18, 2026
Short answer
Buy the Simpson 80145 3.0-orifice set or the 80146 4.0-orifice set only after you match Simpson's chart to your PSI and GPM. Use the 16-inch 80149 wand as a cold-water replacement under 3,600 PSI. Use the 80470 telescoping wand for height, from the ground, and stay under its 4,000 PSI rating.
Compare the published specs
The switch keeps items a manufacturer calls 100% Made in USA or Assembled in USA. Unmarked items are hidden, not rejected. Labels can change. How those words are used.
Best pressure washer nozzles and wands. No prices or star ratings are shown.
As an Amazon Associate, we may earn from qualifying purchases. Disclosure.
Figures are manufacturer maximums unless the cell also shows a rated, or working, number. A higher maximum is not automatically the better machine. Prices are not listed because they change, and this site does not track them.
None of the products on this page have a manufacturer USA-origin label.
Orifice size has to match the pump. This set is 3.0, rated to 3,600 PSI, with 0°, 15°, 25°, 40°, and soap tips. It is not an upgrade over the 4.0 set. It is a different hole. Use Simpson's chart.
PSI3,600 max
GPMDepends on orifice
PowerTips, 1/4-in. QC
WeightA few ounces
Best for: Replacing tips when Simpson's chart calls for a 3.0 orifice.
Advertising disclosure: if you buy through a link, CleanIsFancy may earn a commission, including as an Amazon Associate. The price you pay does not change. How this works.
The 4.0 set is the larger hole, rated higher, and it will feel weak on a small electric. Match it to GPM and PSI. The colors are the same five angles as the 3.0 set.
PSI4,500 max
GPMDepends on orifice
PowerTips, 1/4-in. QC
WeightA few ounces
Best for: Washers whose orifice chart calls for a 4.0 tip, up to 4,500 PSI.
Advertising disclosure: if you buy through a link, CleanIsFancy may earn a commission, including as an Amazon Associate. The price you pay does not change. How this works.
Advertising disclosure: if you buy through a link, CleanIsFancy may earn a commission, including as an Amazon Associate. The price you pay does not change. How this works.
Do not pressure wash from a ladder. This wand extends from 6 to 18 feet and includes a harness. It is rated to 4,000 PSI and 8.0 GPM, cold water, 140°F. Use a wide fan. Stay clear of overhead lines.
PSI4,000 max
GPM8.0 max
PowerTelescoping wand
WeightNot published
Best for: Second-story rinse from the ground, under a 4,000 PSI ceiling.
Advertising disclosure: if you buy through a link, CleanIsFancy may earn a commission, including as an Amazon Associate. The price you pay does not change. How this works.
Every washer on this site that includes tips gives you a set of angles. You replace them when you lose the green one in the grass, or when you need a hole size the original set did not include.
Angle is the fan. Orifice is the fit.
A 40-degree tip is the gentle fan for paint and cars. A 25-degree tip is the general rinsing tip. A 15-degree tip is for concrete and stuck dirt, used with the wand moving. A soap tip is a low-pressure hole that lets the venturi draw chemical. A 0-degree tip is a cutting stream.
The number people skip is the orifice, the size of the hole. Simpson’s 80145 set is orifice 3.0 and rated to 3,600 PSI. The 80146 set is orifice 4.0 and rated to 4,500 PSI. Same colors. Different pumps. Look at your washer’s PSI and GPM, then use the chart Simpson prints for these sets. An electric at 1.2 GPM and a gas machine at 4.0 GPM should not wear the same tip.
Wands have ratings too
The 16-inch Simpson 80149 is a cold-water replacement lance: quick-connect tip, M22 into the gun, 3,600 PSI, 140°F. It is the right length for flatwork. It is not a way to reach a gable.
The 80470 telescoping wand is the reach tool, rated to 4,000 PSI and 8.0 GPM, from 6 to 18 feet, with a harness. The DeWalt 4,200 PSI machine is over that PSI limit. So is any plan that puts a turbo nozzle on the end and aims it at a second-story window. Wide fan, chemical first, then a controlled rinse. The siding guide is the method.
If a fitting does not click or thread on by hand, stop. Forcing an M22 nut with pliers is how housings crack. Relieve pressure before you change a tip: shut the washer off, squeeze the trigger, then swap.
Questions people ask
What do the nozzle colors mean?
On these Simpson sets, red is 0 degrees, yellow is 15, green is 25, white is 40, and black is soap. Other brands sometimes use gray for the wide fan. Read the number stamped on the tip, not only the color.
When is a 0-degree tip acceptable?
Almost never as a starting tip. A 0-degree stream can cut wood, etch concrete, and inject fluid through skin. If that happens, get medical care even if the cut looks small. Use it only for a stuck spot you cannot move with a 15-degree tip, and keep it off siding, decks, and people.
How do I know if I need a 3.0 or a 4.0 orifice?
Simpson publishes a chart against PSI and GPM. A hole that is too small raises pressure and makes the pump work harder. A hole that is too large loses cleaning force. The 4.0 set is not the stronger set. It is the larger hole.
Can I pressure wash a second story from a ladder?
Do not. Use a telescoping wand from the ground, or stop. The Simpson 80470 extends from 6 to 18 feet and includes a harness. Watch for overhead power lines, use a wide fan, and let soap do the work on siding.